PALLADIUM CATALYST SUPPLIERS

Nutech Air Projects is a leading Palladium Catalyst Suppliers in the market. We are working effectively to manufacture and supply these palladium catalysts in the standard high grade complexes.

Palladium Catalyst has made using the organonickel complexes and much more chemically stable for the oxidation purposes which make it far easy to use. The reactivity is perfect to function efficiently.

All About Palladium Catalyst Suppliers

Palladium Catalyst Suppliers are supplying these palladium complexes to get used in cross-coupling reactions. This involves a complete procedure in which palladium reacts as a catalyst for the making of palladium-catalyzed cross-coupling. It has used to encourage the reaction between the specific carbon atoms.

These catalysts then have their involvement in the entire process from manufacturing process till the chemical reactions which take place in our own bodies.

We are manufacturing the palladium catalyst for the purpose of de-oxygenation. It has used to remove the oxygen traces from the nitrogen stream of gas after getting reacted with the hydrogen to become water.

Palladium Catalyst Suppliers are offering them in the ball size of 0.3%, 0.5% and 1% in industrial grade. It can use in the inert gas to de-oxidize or dehydrogenate them. These are available with us within the nominal ranges.

If you are looking too buy the Palladium Catalyst, Nutech Air Project, The Palladium Catalyst Suppliers are always available to provide the best product in the market.

Specification Palladium Catalyst

  • Atomic Symbol: Pd
  • Pd content: 0.48 – 0.52
  • Particle size %: ≤ 95
  • Crushing strength: 40
  • Specific surface area: 1000 – 1300
  • Bulk density g/ml: 0.4 – 0.5
  • Abrasion %: ≤ 1
  • Reaction recovery %: ≥ 99
  • Element Category: Transition metal
  • Density: 12.02 g/cm³
  • Melting Point: 2829.2 °F (1554 °C)
  • Boiling Point: 5365.4 °F (2963 °C)
  • Moh’s Hardness: 4.70

Classification of Palladium Catalyst:

  • Content: 0.3%, 0.5%, 1.0%
  • Grade: Industrial grade
  • Palladium catalyst Granularity: 100 mesh (or following your demand)
  • Moisture: ≤ 3.0%
  • Good hydrogenation conversion, selectivity and stable performance

Chemical Composition:

Nickel (Ni), % Min.14.0
SiO2, % Max.0.20
Al2O3, % 55
K2O+Na2O, % Max.0.30
Fe2O3, % Max.0.35
CaO, % 10

Essential Operation Instructions:

    • The product has already activated and can load and use directly.
    • Whether should the deoxygenate and preheat ( 50-80 ° C ) or not depends on the Oxygen content in the raw gas.
    • The working temperature should be less than 450 ° C

Use Of Palladium Catalyst:

Palladium is mainly used in electronics within multi-layer ceramic capacitors, which help control the flow of current in different parts of the circuit as needed and release the charge to the charge.

Palladium can also work as a practical alternative to platinum in catalysts, which are used to produce a wide variety of chemicals in particular paints, adhesives, fibres, and coatings.

Palladium is prepared with gold or silver, copper and zinc in the form of dental lintels, crowns, and bridges. The palladium catchment mist, which contains a fine wire mesh, filter gas flow and is used to make nitric acid.

Palladium are found in:

      • Fuel Cells (Hydrogen Absorption)
      • Ethanol fuel production (Wacker Process)
      • Coins, Medicine & Water treatment
      • Oil Refining (Catalytic reforming and hydroprocessing)
      • Polyester (Production of Purified Terephthalic Acid)
      • Photography (Platinotype Process)
      • The oxygen content can reduce to 0.1 ppm.

Environmental Impact of Palladium Catalyst

Do not allow the environment to release the material without proper environmental permits. The use of bad Quality Palladium has a little environmental impact. It is present at low levels in some soils, and 0.4 ppm has been found in the leaves of trees. Some plants, such as water hyacinth, are killed by low levels of palladium salts, but most plants tolerate this, although tests suggest that their growth is affected at levels above 3 ppm.

Precaution

Avoid soaking before use and any adsorption of water or organic matter. Otherwise, it should revive.